Duodao Hi-tech District, Jingmen, Kina
+86 135 2379 1950

Phase change heat transfer + capillary reflux! The underlying logic of heat pipe cooling in energy storage batteries

A heat pipe consists of a shell and a capillary wick. Inside, a certain amount of liquid is filled, serving as a phase-change working fluid such as acetone, ethanol, or water. This method involves heating the liquid working fluid inside the evaporator, causing a phase change that produces water vapor. The vapor then returns to the evaporator under the capillary action of the wick. Therefore, the heat pipe utilizes the rapid heat transfer rate of the working medium during phase change and the principle of heat conduction to quickly and effectively transfer heat. The liquefied liquid then returns to the evaporation section of the heat pipe under capillary force.

文章内容

A heat pipe, distributed axially, can be mainly divided into three parts: the two ends are the evaporation section (equivalent to the heating section) and the condensation section (equivalent to the cooling section), respectively, and the middle part is the adiabatic section, as shown in the diagram above. The evaporation section of a heat pipe can be simply understood as an evaporator. When the evaporator is heated, the working medium absorbs heat and evaporates. Correspondingly, the section responsible for transporting heat is called the transport section, and the end in contact with the external cooling fluid can be understood as the condenser. During this process, the working medium undergoes a phase change and releases latent heat. Radially, the heat pipe consists of three parts: the shell, the heat-absorbing core, and the evaporation chamber. The heat transfer process of a heat pipe is a “flow-like path” heat transfer method. After the evaporation section of the heat pipe receives heating from the heat source, the internal working medium absorbs latent heat and undergoes a phase change, entering the condensation section through the adiabatic section. The heat in the condensation section is transferred to the cold source through the heat pipe wall, achieving heat exchange.

The main principle of micro heat pipe radiators used in battery energy storage technology heat dissipation systems is as follows: the fins of the heat pipe’s evaporation section are in direct contact with the battery energy storage technology, transferring the heat generated during charging and discharging to the heat-conducting fins. After heat conduction, the heat is then transferred to the evaporation section of the heat pipe, heating and absorbing the working fluid. This allows the working fluid to flow into the condensation section of the heat pipe, where it comes into contact with the coolant (air or water). The latent heat released by the working fluid vapor is released into the coolant, causing the working fluid to condense into a liquid. Currently, some researchers have applied flat micro heat pipe finned radiators to battery thermal control with good results. Flat micro heat pipe finned radiators mainly use a diameter reduction and flattening process to press a circular sintered core heat pipe into a flat, ultra-thin heat pipe. The part of the heat pipe in contact with the heat source is the evaporator, which receives the heat generated by the heat source (battery energy storage technology model). The sections with welded aluminum fins at both ends are the condensation section. The condensation section conducts heat to the air through the aluminum fins, thereby lowering the temperature of the working gas. The condensed liquid is then driven back to the evaporation section of the heat pipe by the capillary tube, continuing to transfer heat.

文章内容

By employing a flat, micro-heat pipe finned radiator, the heat source temperature can be reduced to approximately 77°C at a convection velocity of 30 m/s, resulting in a more uniform temperature distribution and thus delaying or preventing thermal runaway in battery energy storage technology, thereby meeting the heat dissipation requirements of battery energy storage technology. However, due to the “cold start” phenomenon, the temperature variations between battery energy storage devices are significant, which adversely affects the stable operation of the battery pack.

Del dette opslag
Facebook
WhatsApp

From our products

Battery Pack for LEV-96V
2026/11/18

  Our 96V LEV battery pack: HIGH ENERGY DENSITYAdvanced battery technology delivers higher energy density, providing more power in a compact design and extending driving range for longer-lasting performance. INTELLIGENT BMSEquipped with an intelligent Battery Management System, it monitors voltage, current, and temperature in real time to optimize safety, efficiency, and battery performance. FAST CHARGINGHigh-efficiency […]

Battery Module-168Ah
2026/11/17
Cell Capacity:150/168Ah Grouping Method:1P8S / 2P4S / 1P12S Cycle Life: 3500 cycles @ 0.5C/0.5C @ 25±2°C Operation Temperature: Charge: -20~ 55°C Discharge: -20~ 55°C
Battery Module-125Ah
2026/11/17
Cell Capacity:125Ah Grouping Method:1P8S / 1P10S / 1P12S Cycle Life: 3500 cycles @ 0.5C/0.5C @ 25±2°C Operation Temperature: Charge: -20~ 55°C Discharge: -20~ 55°C
LF100LA
2026/11/06

Parameters Product Model LF100LA-1P11S Cell Model LF100LA Nominal Capacity(Ah) 102 Nominal Voltage (V) 35.2 Nominal Energy (kwh) 3.59 L (mm) 590 W (mm) 165 H(mm) 130 Operation Voltage(V) 27.5~40.15 Operation Temperature Charge:-30~55℃ Discharge:-30~55℃ Cycle Life >2000 cycles 80% SOH and 2800 cycles @ 70% SOH Data collection CCS or Cable

More from the New